Metacarpophalangeal joint reconstruction using a costal osteochondral graft: A case report.

RATIONALE: The conventional treatment of giant cell tumors is intralesional curettage with local adjuvant therapy. Because hand tumors have a high local recurrence, the primary goal for treating tumors of the hand is to eradicate the lesion. PATIENT CONCERNS: To preserve the metacarpophalangeal (MCP) joint function as well as avoid further recurrence after surgery. DIAGNOSES: The giant cell tumor invades the patient's MCP joint in an index proximal phalanx. INTERVENTIONS: Using computer-aided design and three-dimensional printing techniques, we reformed the original shapes of the MCP joint and its peripheral bone to replica models. The surgeon then performed an en bloc resection and proximal phalanx with MCP joint reconstruction by fabricating the patient's costal osteochondral graft during the operation. OUTCOMES: After 6 months of rehabilitation, the patient's finger functions could pinch and grasp objects naturally. At the 1-year follow-up, the range of motion of the MCP, proximal interphalangeal, and distal interphalangeal joints improved from flexion of 35° to 60°, 75° to 85°, and 60° to 80°, respectively. The hand function achieved the mean performance of non-preferred hands for young females at the postoperative 3-year follow-up. LESSONS: The customized prototyping technique has the potential to replica the original patient's bony graft to reach the goal of minimizing the defects at the donor site and maximizing the function of the reconstructed MCP joint.

Virtual Surgical Planning for Temporomandibular Joint Reconstruction with Stock TMJ Prostheses: Pilot Study.

The temporomandibular joint (TMJ) is one of the most complex joints in the human anatomy. In advanced degenerative stages, conservative or minimally invasive surgical therapies have failed to restore joint function, and joint replacement with prostheses has been required. Stock prostheses, compared to custom-made prostheses, are much less expensive and require less pre-operative preparation time. Four patients followed for years for temporomandibular dysfunction and previously operated on by arthroscopy or open joint surgery that have been reconstructed with stock TMJ prostheses (STMJP) through virtual surgical planning (VSP) and an STL model with surgical and positioning guides were included. The median follow-up was 15 months; the median number of previous TMJ surgeries was 2. The mean preoperative MIO was 24.6 mm and at longest follow-up was 36.4 mm. The median preoperative TMJ pain score was 8, and the median postoperative TMJ pain was 3. All patients have improved their mandibular function with a clear improvement of their initial situation. In conclusion, we believe that stock TMJ prostheses with virtual surgical planning and surgical guides are a good alternative for TMJ reconstruction at the present time. Nonetheless, prospective and randomized trials are required with long-term follow up to assess their performance and safety.

Simultaneous standard total joint prosthesis reconstruction with SSRO and Le Fort I osteotomy in the treatment of unilateral temporomandibular joint ankylosis with jaw deformity: a case cohort study.

OBJECTIVE: Unilateral temporomandibular joint ankylosis with jaw deformity (UTMJAJD) may require simultaneous total joint prosthesis (TJP) reconstruction, sagittal split ramus (SSRO), and Le Fort I osteotomies. The purpose of this study was to evaluate outcomes in patients treated with these procedures. METHODS: Patients diagnosed UTMJAJD between 2016 and 2018 were selected for the study. Mandible-first procedure was performed after ankylosis release with TJP on the ankylosed side and SSRO on the contralateral side. Le Fort I osteotomy with and without genioplasty was lastly performed. Maximal incisor opening (MIO), facial symmetry, and jaw and condyle stability were compared before, after operation, and during follow-ups. RESULTS: Seven patients were included in the study. Their average chin deviation was 9.5 ± 4.2 mm, and maxillary cant was 5.1 ± 3.0°. After operation, jaw deformity significantly improved, with chin deviation corrected 7.6 ± 4.1 mm (p = 0.015) and advanced 5.9 ± 2.5 mm (p = 0.006). After an average follow-up of 26.6 ± 17.1 months, MIO significantly increased from 11.4 ± 9.3 to 35.7 ± 2.6 mm (p = 0.000). The occlusion was stable with no significant positional or rotational changes of the jaw (p > 0.05). There was no obvious condylar resorption during follow-ups. CONCLUSION: Simultaneous TJP reconstruction, SSRO, and Le Fort I osteotomy are reliable and effective methods for the treatment of UTMJAJD.

Surface replacing arthroplasty of a post-traumatic stiff and deviated proximal interphalangeal joint in an adolescent.

This case report describes the 4-year outcomes of proximal interphalangeal joint arthroplasty in a 14-year-old girl with a stiff joint after trauma. At follow-up, active range of motion was 35°, she was pain-free and satisfied with the outcome. Implant arthroplasty seems to be a valuable option for young patients with persistent post-traumatic stiff and deviated PIP joints to-at least temporarily-increase quality of life.

Complications after total wrist arthroplasty.

We reviewed the incidence and management of complications after total wrist arthroplasty, as reported in the literature, with so-called fourth-generation implants and other recent designs. While early intraoperative and postoperative complications, including fractures, tendon lacerations, infection, nerve compression, tendonitis, stiffness and chronic regional pain syndrome, had an acceptable incidence, late complications, such as periprosthetic osteolysis and implant loosening, occurred more frequently. Implant survival at 10 years was in the range of 70%-80% in most publications. Several of the implants have been modified or withdrawn. Instability and dislocation were frequent after a pyrocarbon spacer. Failed arthroplasties can be salvaged by revision arthroplasty or total wrist arthrodesis. Revision arthroplasty has a lower survival rate than primary arthroplasty and does not clearly offer important significant advantages over total wrist arthrodesis in terms of patient-reported outcome measures. Further development of prosthetic design, new materials and more knowledge on patient-related risk factors are needed.

High Fracture Rate of AVANTA Silicone Implant Following Arthroplasty of the Thumb MCP Joint of Rheumatoid Arthritis Patients with Boutonniere Deformities.

We retrospectively investigated the mid-term outcomes of arthroplasty using the AVANTA silicone implant for thumb metacarpophalangeal (MCP) joints with boutonniere deformity in patients with rheumatoid arthritis (RA). This study involved 36 thumbs of 33 RA patients with a mean follow-up period of 5.1 years (range, 2.0-13.3). Postoperatively, the mean extension was significantly increased and the mean flexion was significantly decreased (p<0.001, p<0.001, respectively), resulting in the mean arc of range of motion (ROM) shifting in the direction of extension after surgery. Implant fracture was observed in 10 thumbs (28%), and 4 of these (11%) underwent revision surgery. The survivorship with implant fracture and revision surgery as endpoints were 73.4% and 91.8% at 5 years, respectively. The preoperative arc of ROM and the postoperative flexion range of the implant-fracture group were significantly greater than those in the no-implant-fracture group (p=0.039, 0.034, respectively). These results suggest the importance of patient education and careful rehabilitation to prevent excessive flexion. Overall, the AVANTA silicone implant showed a relatively high rate of implant fracture at our institute.

[Influencing factors on effectiveness of reverse total shoulder arthroplasty].

Objective: To summarize the influencing factors on the effectiveness of reverse total shoulder arthroplasty (RTSA), so as to provide reference for clinical treatment. Methods: The related research literature of RTSA at home and abroad was extensively consulted, and the factors that may affect the effectiveness were summarized from the aspects of surgical technique, muscle condition, general condition of patients, psychological expectation, and lifestyle. Results: For surgical techniques, different surgical approaches have their own advantages. The glenoid notch, poor bone ingrowth, increased bone resorption, and infection would lead to the loosening of glenoid prosthesis. In addition, the neck shaft angle and inclination angle of humeral prosthesis affect the occurrence of glenoid notch and the range of motion of joint internal/external rotation after operation, respectively. For muscle condition, the quality of teres minor and deltoid muscle has an important influence on joint stability after operation. Moderate increase of deltoid muscle tension can improve joint mobility after operation, and suture repair of subscapular tendon during operation can relieve joint pain and improve function, range of motion, and strength. For the general condition of patients, gender, age, and body mass index are all related to postoperative joint function and complications, and different occupations and postoperative exercise levels affect the recovery. The patients with severe degenerative diseases, poor preoperative function, and long disease duration have lower expectations and higher satisfaction with the effectiveness, and bad lifestyle has a negative impact on the effectiveness. Conclusion: The effectiveness of RTSA is related to surgical technique, muscle condition, general condition of patients, psychological expectation, and lifestyle. In order to avoid the loosening of glenoid prosthesis, the operator should choose humeral prosthesis with small neck shaft angle and large glenoid ball and put them down and inclined inferiorly during operation, and choose appropriate approach to eliminate space with drainage to reduce the risk of infection. After operation, patients should avoid activities that generate high anterior and posterior shear forces. In addition, the humeral prosthesis with a inclination angle of 10°-20° can achieve the best balance between the range of internal rotation and external rotation after operation. Proper deltoid tension can maintain joint stability and good range of motion. Suture of subscapular tendon is recommended.

Arthroscopic reduction and rigid fixation of the anteriorly displaced temporomandibular joint disc without reduction using titanium screw: a case series.

OBJECTIVES: To evaluate the effectiveness of arthroscopic reduction and rigid fixation (ARRF) using a suture-free titanium screw as a treatment approach to temporomandibular joint's (TMJ) anterior disc displacement without reduction (ADDwoR) and assess its impact on clinical outcomes, including improvements in symptoms related to TMJ disorders. MATERIALS AND METHODS: A series of twenty patients presented to the Department of Orthognathic and Temporomandibular Surgery at West China Hospital of Stomatology between September 2022 and January 2023, complaining of symptoms such as pain, clicking, and limited mouth opening. Standard magnetic resonance image (MRI) imaging T1 and T2 sequences in both sagittal and coronal views study with closed and maximal open mouth positions were taken preoperatively to assess the disc's position, integrity, and shape. Also, cone-beam computed tomography (CBCT) scans images to find any degenerative changes and evaluate the condylar bone's features and volume. Additionally, the clinical examination assesses limited oral opening, mechanical pain, and the presence of any noises such as clicking and crepitus. All cases were treated under general anesthesia using the arthroscopic release, reduction, and rigid fixation of the TMJ's ADDwoR to establish a normal disc-condyle relationship and to restore the functional position. RESULTS: Patients' symptoms, such as pain and mouth opening, improved significantly following the arthroscopic treatment. Postoperative MRI and CBCT imaging follow-up conducted at 6 months demonstrated the stable position of the reduced TMJ disc and the fixation screw. Notably, none of the patients exhibited signs of relapse during this follow-up period. CONCLUSION: Overall, the ARRF of TMJ's ADDwoR using a suture-free titanium screw proved to be safe and provides satisfactory results, in addition to the several advantages of using suture-free titanium screws, such as biocompatibility, strong fixation, and durability. However, it is a technically demanding procedure requiring extensive, long-term training. CLINICAL RELEVANCE: ARRF using a cost-effective fixation titanium screw to treat ADDwoR emerges as a clinically effective minimally invasive approach.

Outcomes of Total Ankle Arthroplasty After Periprosthetic Cyst Curettage and Bone Grafting.

Total ankle arthroplasty (TAA) has become a popular management option for ankle arthritis. Periprosthetic osteolysis is one of the most common causes for reoperation in TAA. A CT scan should be done in all suspected osteolysis cases to confirm location, quantify size and aid in surgical planning. These patients are often asymptomatic with limited evidence regarding appropriate management. Smaller lesions should be monitored for progression in size. Periprosthetic cysts measuring 10-15mm in all three axes should be considered for debridment and curettage with autogenous bone grafting. The authors believe that bone grafting of large asymptomatic periprosthetic cysts could prevent implant failure.

Quality of Outcomes Research in Total Ankle Arthroplasty.

Total ankle arthroplasty is a topic that has recently gained increasing interest, largely due to the improved outcomes, which have been demonstrated by short- and mid-term research studies on the newer, third-generation implant designs. The purpose of this review is to provide an updated assessment of the quality of outcomes research on total ankle arthroplasty.

Outcomes of Lateral Transfibular Approach for Total Ankle Replacement.

Total ankle replacement through a lateral transfibular approach with trabecular metal implants was introduced in 2012 and originally was advertised as a safer approach in terms of wound healing issues. Further studies showed no significant difference comparing anterior and lateral approach for infections and would healing issues, whereas the main advantage is deformity correction, acting on coronal, sagittal, and rotational deformities and on fibular length issues. It showed a survival rate of 97.7% at 5 years follow-up.

A multicenter, randomized controlled trial comparing a second-generation uncemented trabecular metal-backed vs. cemented polyethylene glenoid component in total shoulder arthroplasty: 5-year results.

BACKGROUND: Previously, we reported early (2-year) findings from a randomized controlled trial comparing a second-generation uncemented trabecular metal-backed (TM) glenoid vs. cemented polyethylene glenoid (POLY) in patients undergoing a total shoulder arthroplasty. The purpose of the current study is to report disease-specific quality of life, clinical, patient-reported, and radiographic outcomes at midterm (5-year) from this trial. METHODS: Five surgeons from 3 centers participated. Patients 18-79 years with a primary diagnosis of glenohumeral osteoarthritis were screened for eligibility. Randomization to an uncemented TM or cemented POLY glenoid was performed intra-operatively after adequate bone stock was confirmed. Study intervals were baseline, 2- and 5-year postoperative. The primary outcome was the Western Ontario Osteoarthritis Shoulder (WOOS) quality of life score. Secondary outcomes included the American Shoulder and Elbow Surgeons Standardized Shoulder Assessment Form, EuroQol-5 Dimensions, and 12-Item Short Form Health Survey scores and clinical and radiographic examinations. Radiographic images were reviewed for metal debris according to Endrizzi. Mixed effects repeated measures analysis of variance for within- and between-group comparisons were performed. RESULTS: Of the 104 patients who consented, 93 were randomized (46 TM; 47 POLY). There were no differences between groups at baseline (TM: mean age 66.5 years [standard deviation (SD) 6.4], 24 male and 22 female; and POLY: mean age 68.4 years [SD 5.5], 23 male / 24 female). Mean (SD) WOOS scores at baseline and 2 and 5 years were as follows: TM, 32 (21), 92 (13), and 93 (11); POLY, 27 (15), 93 (11), and 93 (10), respectively. No statistical or clinically relevant differences were noted with patient-reported outcomes between groups. Metal debris was observed in 11 (23.9%) patients, but outcomes were not negatively impacted, and debris severity was minor (grades 1 and 2). Complication rates were similar between groups (TM: 7 of 46 [15.2%], and POLY: 8 of 47 [17.0%]; P = .813). No aseptic glenoid failures were reported, but 1 patient in the TM group required revision because of infection. CONCLUSIONS: Our short-term (2-year) findings were maintained with longer follow-up. At 5 years postoperation, there were no statistically or clinically significant differences between an uncemented second-generation TM glenoid and a cemented polyethylene glenoid with respect to disease-specific quality of life or patient-reported outcomes. No glenoid implant failures were reported, and complication rates were similar between groups. Only one complication was glenoid related (1 infection in the TM group). Metal debris was observed in 23.9% of patients with a TM glenoid but did not negatively influence implant survival, patient-reported outcomes, or shoulder function.

A New Technique for Arthroscopic Discectomy of the Temporomandibular Joint Disc Perforation: A Technical Note.

Disc perforation represents the result of the degenerative process in joint structures that may lead to pain, joint noise, restricted mouth opening, osteoarthritis, and even dentofacial anomalies. Even though discectomy has proven benefits, with promising outcomes reported, it is mainly described using an open approach. While some arthroscopic techniques have been published, they are limited to managing perforation, edge widening, and inflammation treatment and do not describe complete disc removal. We describe a novel step-by-step arthroscopic discectomy technique utilizing two operative cannulas that completely remove nonfunctional cartilaginous tissue.

What Plastic Surgeons Should Know about Small-Joint Arthroplasty: Is This for Your Practice?

SUMMARY: This article reviews the state of the art for arthroplasty of the metacarpophalangeal and proximal interphalangeal joints. Arthritis that affects these joints can result in significant pain and compromised function. The authors review indications for arthroplasty for each joint, types of implants to consider, technical considerations, patient expectations, and outcomes and complications.

The Effect of Frontal Deformity at the Ankle Joint on Total Ankle Arthroplasty Revision Rate.

The presence of severe coronal plane deformity in the ankle joint is widely recognized as challenging to correct by total ankle joint arthroplasty alone, necessitating additional rearfoot fusion. The primary aim of this retrospective study was to investigate the potential associations between the presence or severity of coronal tibiotalar deformities and adverse outcomes after isolated total ankle arthroplasty, such as revisions and complications. The secondary aim was to analyze the potential associations between comorbidities, demographics, and implant types, and adverse outcomes. Our study's distinctive feature was its exclusive concentration on patients with deformities centralized in the ankle joint. Chart review was performed on 496 ankles in 456 patients who had a total ankle arthroplasty by 5 surgeons from 1/1/2010 to 12/31/2019. After exclusion and inclusion criteria were applied, total of 214 ankles in 210 patients were included for data analysis. At a mean follow-up period of 3 ± 2.0 years, our cohort had 15 (7.0%) revisions and 15 (7.0%) complications. Multivariable logistic regression model showed that the presence or severity of the coronal deformity was not significantly associated with incidences of revisions or complications. Female patients had significantly lower revision rate. Otherwise, the differences in age, race, body mass index, tobacco use, presence of diabetes, chronic kidney disease, atrial fibrillation, length of surgery, or type of implant were not significantly associated with incidences of revisions or complications. Further study could be performed to analyze the extent and duration that the coronal deformity correction is maintained after total ankle arthroplasty as well as the effect of each soft tissue procedure performed with the total ankle arthroplasty.

Mini-augmented glenoid baseplate and mini-humeral tray reverse total shoulder arthroplasty implant comparisons: two-year clinical outcomes.

BACKGROUND: Augmented glenoid baseplate and offset humeral tray reverse total shoulder arthroplasty (RTSA) implants may decrease the mechanical impingement that creates scapular notching and improve shoulder function. This study evaluated the clinical efficacy of three different RTSA glenoid baseplate and offset humeral tray combinations for patient-reported shoulder function, pain and instability, radiographic imaging evidence of glenoid baseplate or humeral stem subsidence and migration, bony changes associated with implant loosening, and scapular notching over the initial 2 years post-RTSA. Primary outcomes included active shoulder mobility, perceived function, pain, instability, scapular notching, and implant survival. METHODS: Sixty-seven patients from 6 research sites received one of three different glenoid baseplate and humeral tray combinations. Group 1 (n = 21) received a mini-augmented glenoid baseplate with a standard humeral tray; Group 2 (n = 23) received a standard glenoid baseplate and a mini-humeral tray with 3 trunnion offset options; Group 3 (n = 23) received both a mini-augmented glenoid baseplate and a mini-humeral tray with 3 trunnion offset options. Subjects underwent radiologic evaluation, completed the ASES scale, the EQ-5D-5L quality of life scale, VAS shoulder pain and instability questions, and active shoulder mobility measurements pre-operatively, and 6-weeks, 6-months, 1-2 years post-RTSA. RESULTS: Improved active shoulder mobility, quality of life, perceived function, decreased shoulder pain and instability, excellent implant survival and minimal scapular notching were observed for all groups. Group 3 had better overall active shoulder mobility than the other groups and better perceived function than Group 1. CONCLUSION: The group that received the mini-augmented glenoid baseplate and mini-humeral tray combination had better overall active shoulder flexion, external rotation at 90° abduction, and internal rotation. This group also had better perceived shoulder function compared to the group that received a mini-augmented glenoid baseplate with a standard humeral tray.

Alloplastic temporomandibular joint replacement - past, present, and future: "Learn from the past, prepare for the future, live in the present." Thomas S. Monson.

Based on evidence from the orthopaedic, biomedical engineering, and oral and maxillofacial surgical literature, this paper discusses reported successes and failures of past alloplastic temporomandibular joint (TMJ) devices that have led to the development of present total temporomandibular joint replacement (TMJR) devices. The paper concludes with discussion of the ongoing research that will lead to future embodiment (materials, designs, and manufacture) advances in TMJR management of severe and debilitating end-stage TMJ disease, further improving patients' mandibular function, form, and overall quality of life.

Comparison of Radiographic Talar Loosening Rates Between Salto-Talaris and INBONE II.

BACKGROUND: Despite substantial increase in total ankle arthroplasty (TAA) nationwide, there are few studies comparing flat-cut vs chamfer-cut talar systems in TAA with regard to radiographic aseptic loosening rates of the implant. METHODS: This retrospective study included 189 Salto-Talaris TAA and 132 INBONE II primary TAA with a minimum 1-year follow-up. Patient characteristics were obtained including gender, age at surgery, body mass index (BMI), smoking status, primary diagnosis, surgical time, and the presence of diabetes. Radiographic evidence for aseptic loosening was assessed. Statistical analysis was performed for comparison in outcomes between Salto-Talaris and INBONE II. RESULTS: The mean age of the study population was 63.5 ± 9.8 years at surgery. Mean follow-up was 4.9 ± 3.0 years. Radiographic aseptic loosening of the tibial implant showed no significant difference between the 2 groups: Salto-Talaris, 18%, and INBONE II, 18.9% (P = .829). Aseptic loosening of the talar implant also showed no significant difference between the 2 groups: Salto-Talaris, 1.6%, and INBONE II, 1.5% (P = .959). No variables, including the implant type, were found to contribute to the aseptic loosening rate of either the tibia or talus. CONCLUSION: In our cohort, we observed no difference in radiographic implant aseptic loosening between Salto-Talaris and INBONE II systems. LEVEL OF EVIDENCE: Level IV, retrospective case series study.

Early Survivorship, Clinical and Radiographic Outcomes of a Modular Augmented Revision Total Ankle Arthroplasty System.

BACKGROUND: As the number of total ankle arthroplasties (TAAs) performed annually increases, there is increased demand for modular revision implants. There is limited early survivorship and clinical outcome data for the INVISION Total Ankle Arthroplasty System (Wright Medical Technology/Stryker). This study aims to determine early implant survivorship, complications, and radiographic and patient-reported outcomes (PROs) of the INVISION implant in the revision setting. METHODS: This is a single-institution retrospective review of adult patients who underwent revision TAA with the INVISION implant with minimum 2-year follow-up. Demographics, complications, radiographic data, and PROs (PROMIS) were collected. The primary outcome was implant survivorship. Secondary outcomes were reoperation, radiographic complications, and PROs. RESULTS: Nineteen patients underwent revision INVISION TAA with mean follow-up of 3.5 years. INVISION revision TAA was used for tibial (n = 6) or talar (n = 7) component subsidence, recurrent tibiotalar malalignment (valgus = 1, varus = 3), and postinfection bone loss (n = 2). Two-year implant survivorship was 100%. There were no reoperations. One patient had lucency of the talar component at 6 months post TAA revision with INVISION. One patient had talar subsidence at final follow-up. Two-year postoperative follow-up PROMIS domains improved significantly (P < .05). CONCLUSION: There was excellent short-term survivorship of the INVISION TAA implant, with no failures. There were significant improvements in PROs and low rates of subsidence and lucencies. The results of this study support using the INVISION implant in the revision TAA setting. LEVEL OF EVIDENCE: Level III, retrospective cohort.

Does trapezium remodeling correlate with cup shape?

We investigated whether trapezium bone reaction was different following implantation of a trapeziometacarpal total joint replacement with a hemispheric or a conical cup. Fifty-three Keri Medical Touch implants with hemispheric cup and 53 with conical cup were prospectively followed up radiographically. We compared radiographs taken immediately and one year after surgery for cup subsidence, tilt, heterotopic ossification and loosening. Cup subsidence of at least 1 mm was detected in 4% of cases for both cup types. Additive bone reaction around the cup of more than 1 mm was present in 62% of conical cups and 47% of hemispheric cups. These were minor and there were no large ossifications with risk of impingement. Minor radiolucency was seen superficially at the implant-bone interface of 13% of the hemispheric cups and 9% of the conical cups. None of these bone reactions differed significantly according to cup design.